jetgerma.blogg.se

1. #Radio shack gigaware usb to serial driver drivers#
2. #Radio shack gigaware usb to serial driver driver#
3. #Radio shack gigaware usb to serial driver windows 10#

The CDR Tool immediately recognized the adapter as COM3.

#Radio shack gigaware usb to serial driver drivers#

Once these were removed, I installed the windows seven drivers from the CD and the adapter worked perfectly. This is a delicate process and it would be easy to break the soldered connections by the strain relief if you are not careful. In order to remove the adapter nuts I had to pry open the plastic casing around the serial end and use a Dremmel tool to cut away the backing of the female nuts on the other side of the mounting plate. I thought I could simply unscrew the nuts on the adapter but they are permanently attached. The nuts would not even let the adapter plug touch the serial port on my device. Since neither one is male, they could not connect. This tool also has two female nuts next to the serial plug. I was connecting this to a Bosch CDR tool which has a serial interface. Reviewed in the United States on December 16, 2016īefore you buy, BE AWARE that this adapter has two female nuts next to the plug for securing the serial port to the adapter. Works great BUT designed to connect to male securing screws. In both installations, after shutting down Windows Device Manager and starting it again, it identified the presence of the TU-S9 (this time identifying the com port) and everything worked perfectly from there.

#Radio shack gigaware usb to serial driver driver#

With both installations the Device Manager showed the presence of the TU-S9, but when I clicked on "properties," the message came up that the driver wasn't present.

#Radio shack gigaware usb to serial driver windows 10#

To test my luck, I installed the device on my wife's Windows 10 computer with the same result - works perfectly.ĭon't let you heart skip a beat. It now allows me to control the telescope flawlessly. The driver installed very smoothly and the Devise Manager identified the TU-S9.

I elected to give the TRENDnet TU-S9 (version 2) a try even though the package indicated that the device was supported only through Windows 8. When I upgraded my computer system to Windows 10 this device was not supported. I had been using a Gigaware (Radio Shack) USB to Serial Converter to control a Celestron goto telescope under Windows Vista. Reviewed in the United States on April 25, 2016 I had been using a Gigaware (Radio Shack) USB to. But be forewarned and order the extension cable at the same time. Previous experience with random Chinese converters and their non-standard chipsets has been enough frustration to make this tolerable. That solves both problems, but adds another $5 or so to the total price and a few days waiting for it to arrive. So what you need is a straight through DB9 extender cable, male to female, with screws on both ends. I don't think that whoever designed this configuration has really ever used RS232/DB9 connectors seriously. Typically, the nuts on the device you are connecting to hold the socket in place, so you can't really remove them either. So this is a nuts to nuts connector in practice, which means IT DOESN'T FIT, because the nuts get in the way. Now, there is no standard to define whether it should have nuts or screws, but the practical reality is that almost invariably it is the socket fixed to a device, on a bulkhead, that has nuts. The second problem is that it has captive nuts on the DB9 connector.

You are going to need an extension cable, either USB or DB9 - see below before going and buying a USB extender cable. However, two drawbacks knock off two stars.įirst: The cable really is too short to do anything with. No messing around with drivers for random chip sets from anonymous websites with poor English. This would normally get 5 stars, because it just works with Windows 10. Reviewed in the United States on April 9, 2018 💰Save on Amazon!💰 Best Deal On Amazon! FAQ : Reviews : PJP